Top dead centre
From WOI Encyclopedia Italia
In a reciprocating engine, the dead centre is the position of a piston in which it is farthest from, or nearest to, the crankshaft. The former is known as top dead centre (TDC) while the latter is known as bottom dead centre (BDC).
More generally, the dead centre is any position of a crank where the applied force is straight along its axis, meaning no turning force can be applied. Many sorts of machines are crank driven, including unicycles, bicycles, tricycles, various types of machine presses, steam locomotives, and other steam engines. Crank-driven machines rely on the energy stored in a flywheel to overcome the dead centre, or are designed, in the case of multi-cylinder engines, so that dead centres can never exist on all cranks at the same time. A steam locomotive is an example of the latter, the connecting rods being arranged such that the dead centre for each cylinder occurs out of phase with the other one (or two) cylinders.
Contents |
Bicycles
Bicycle cranks have dead centres at approximately 12 o'clock and 6 o'clock where simple pushing down of the pedal will not turn the chainwheel, but the rider's leg is able to apply tangential force at the pedal to overcome it. Fixed gear bicycles (without a freehub) use the momentum of the bicycle and rider to keep the chainwheel turning even if the rider makes no attempt to pedal in a circular motion.
Internal combustion engine
Top dead centre is the datum point from which engine timing measurements are made. For example, ignition system timing is normally specified as degrees before top dead centre (BTDC) although a very few small and fast-burning engines require a spark just after top dead centre (ATDC), such as the Nissan MA engine with hemispherical combustion chambers, or hydrogen engines.
Top dead centre for cylinder one is often marked on the crankshaft pulley, the flywheel or dynamic balancer or both, with adjacent timing marks showing the recommended ignition timing settings as decided during engine development. These timing marks can be used to set the ignition timing either statically by hand or dynamically using a timing light, by rotating the distributor in its seat.
In a multi-cylinder engine, pistons may reach top dead centre simultaneously or at different times depending on the engine configuration. For example:
- In the V-twin configuration, the two pistons reach TDC at different times, equal to the angular displacement between the cylinders.
- In the flat twin configuration, two opposing pistons reach TDC simultaneously, which is also called 0° displacement.
- In the straight-4 configuration, the two end pistons (pistons 1 and 4) reach TDC simultaneously, as do the two centre pistons (pistons 2 and 3), but these two pairs reach TDC with an angular displacement of 180°. Similar patterns are found in almost all straight engines with even numbers of cylinders, with the two end pistons and two middle pistons moving together (not necessarily 180° out of phase however) and the intermediate pistons moving in pairs in mirror-image around the centre of the engine.
- In the flatplane V8 and many larger V engines, the piston motion within each bank is similar to that of a straight engine, however in the crossplane V8 and all V10 engines the motion is far more complex.
The concept of top dead centre is also extended to pistonless rotary engines, and means the point in the cycle in which the volume of a combustion chamber is smallest. This typically occurs several times per rotor revolution; In the Wankel engine for example it occurs three times for every one revolution of the rotor.
By finding the volume of the cylinder using TDC and BDC and multiplying it by the number of cylinders you have, you will get your engine displacement.
Steam engine
As steam engines are commonly horizontal, the relevant terms are front dead centre and back dead centre rather than "top" and "bottom".
If a single-cylinder steam engine stops in either of the dead centre positions it must be moved off the dead centre before it will re-start. In small engines this is done by turning the flywheel by hand. In large engines the flywheel is moved with a lever or "turning bar". Both operations must be done with care to avoid the operator becoming entangled in the machinery.
Steam locomotives normally have two cylinders with the cranks set at right angles so one piston will always be off the dead centre and no starting assistance is required.
Other machines
This term is also used in the realm of production equipment. A mechanical punch press employs a crankshaft similar to that found in an engine. In the punch press the crankshaft drives a ram which when it is farthest away from the platen of the press is considered to be in the position of top dead centre.
| Articles relating to Automobile configurations | |
|---|---|
| Car body style and classification | 2 plus 2 | Antique car | Cabrio coach | Cabriolet | City car | Classic car | Compact car | Compact performance car | Compact SUV | Convertible | Coupé | Coupé convertible | Coupe Utility | Crossover SUV | Custom car | Drophead coupe | Fastback | Full-size car | Grand tourer | Hardtop | Hatchback | Hot hatch | Hot rod | Large family car | Leisure activity vehicle | Liftback | Limousine | Luxury car | Microcar | Mid-size car | Mini SUV | Minivan | Multi-purpose vehicle | Muscle car | Notchback | Personal luxury car | Pickup truck | Retractable hardtop | Roadster | Sedan | Saloon | Small family car | Sport compact | Sports car | Sport utility vehicle | Spyder | Station wagon | Estate car | Supermini | Targa top | Taxicab | Touring car | Town car | T-top | Ute | Van | Voiturette |
| Specialised vehicles | Gyrocar | Flying car. Amphibious vehicle |
| Fuel technologies | Internal combustion engine | Electric vehicle | Neighborhood electric vehicle | Hybrid vehicle | Battery electric vehicle | Hydrogen vehicle | Fuel cell | Plug-in hybrid electric vehicle | Steam car | Alternative fuel cars | Biodiesel | Gasohol | Ethanol | LPG (Propane) | Homogeneous Charge Compression Ignition | Liquid Nitrogen | Gasoline Direct Injection |
| Driven wheels | Four-wheel drive | Front-wheel drive | Rear-wheel drive | All-wheel drive | Two-wheel drive |
| Engine positioning | Front engine | Rear engine | Mid engine |
| Layout | FF layout | FR layout | MR layout | MF layout | RR layout |
| Engine configuration | Internal combustion engine | Straight-6 | V engine | Wankel engine | Reciprocating engine | Inline engine | Flat engine | Flathead engine | Diesel engine | Two-stroke cycle | Four-stroke cycle | Pushrod engine | Straight engine | H engine | Turbodiesel | Hybrid vehicle | Rechargeable energy storage system | Electric vehicle | Hydrogen vehicle |
| Body | Framework | A-pillar | Bumper | Cabrio coach | Chassis | Crumple zone | Body-on-frame | Dagmar bumpers | Fender | Fender skirts | Grille | Hood | Hood scoop | Monocoque construction | Pontoon fenders | Quarter panel | Shaker scoop | Spoiler | Subframe | Tonneau |
| Doors | Butterfly doors | Gull-wing door | Scissor doors | Suicide door | |
| Glass | Sunroof | Greenhouse | Windshield | |
| Other | Antenna ball | Hood ornament | Japan Black paint | Nerf bar | Truck accessory | Bumper sticker | |
| Exterior Equipment | Lighting | Daytime running lamp | Headlamp | Headlight styling | Hidden headlamps | Retroreflector | Sealed beam | Trafficators | High intensity discharge |
| Other | British car number plates | Distance sensor | US and Canadian license plates | Vanity plate | Vehicle registration plate | Windscreen wiper | Windshield washer fluid | |
| Car engine | Air/Fuel | Air filter | Automatic Performance Control | Blowoff valve | Boost | Boost controller | Butterfly valve | Carburetor | Charge cooler | Centrifugal type supercharger | Cold air intake | Engine management system | Engine Control Unit | Forced induction | Front mounted intercooler | Fuel filter | Fuel injection | Fuel pump | Fuel tank | Gasoline direct injection | Indirect injection | Intake | Intercooler | Manifold | Manifold vacuum | Mass flow sensor | Naturally-aspirated engine | Ram-air intake | Scroll-type supercharger | Short ram air intake | Supercharger | Throttle body | Top mounted intercooler | Turbocharger | Turbocharged Direct Injection | Twin-turbo | Variable Length Intake Manifold | Variable geometry turbocharger. Warm air intake |
| Exhaust | Catalytic converter | Emissions control devices | Exhaust pipe | Exhaust system | Glasspack | Muffler | Oxygen sensor | |
| Cooling | Aircooling | Antifreeze | Ethylene glycol | Radiator | Thermostat | |
| Ignition system | Starter | Car battery | Contact breaker | Distributor | Electrical ballast | Ignition coil | Lead-acid battery | Magneto | Spark-ignition | Spark plug | |
| Other | Balance shaft | Block heater | Crank. Cam | Camshaft | Connecting rod | Combustion chamber | Crank pin | Crankshaft | Crossflow cylinder head | Crossplane | Desmodromic valve | Engine knocking | Compression ratio | Crank sensor | Cylinder | Cylinder bank | Cylinder block | Cylinder head | Cylinder head porting | Dump valve,Engine balance | Oil filter | Firing order | Freeze plug | Gasket | Head gasket | Hypereutectic piston | Hydrolock | Lean burn | Main bearing | Motor oil | Multi-valve | Oil sludge | Overhead camshaft | Overhead valve | PCV valve | Piston | Piston ring | Pneumatic valve gear | Poppet valve | Power band | Redline | Reverse-flow cylinder head | Rocker arm | Seal | Sleeve valve | Starter ring gear | Synthetic oil | Tappet | Timing belt | Timing mark | Top dead centre | Underdrive pulleys | Valve float | Variable valve timing | |
| Interior equipment | Instruments | Backup camera | Boost gauge | Buzzer | Car computer | Carputer | Check Engine light | Fuel gauge | Global Positioning System | Idiot light | Navigation system | Odometer | Speedometer | Tachometer | Trip computer |
| Controls | Bowden cable | Cruise control | Electronic throttle control | Hand brake | Manettino dial | Steering wheel | Throttle | Gear stick | |
| Motor vehicle theft deterrence | Car alarm | ESITrack | Immobiliser | Klaxon | Vehicle tracking system | VIN etching | |
| Passenger safety & seating | Airbag | Armrest | Automatic seatbelt | Bench seat | Bucket seat | Child safety lock | Dicky seat | Passive safety | Rumble seat | Seat belt | |
| Other | Air conditioning | Ancillary power | Car audio | Car phone | Center console | Dashboard | Motorola connector | Power window | Rear-view mirror | TripSense | |
| Powertrain | Wheels and Tires | All-terrain tyre | Bias-ply tire | Contact patch | Custom wheel | Drive wheel | Hubcap | Magnesium alloy wheel | Mud-terrain tyre | Paddle tires | Radial tire | Rostyle wheel | Run flat tires | Schrader valve | Slick tire | Spinner | Tire code | Tread | Treadwear rating | Whitewall tire | Wire wheels |
| Transmission | Automatic transmission | Clutch | Continuously variable transmission | Differential | Driveshaft | Electrorheological clutch | Epicyclic gearing | Fluid coupling | Fully-automatic transmission | Gear stick | Gearbox | Hydramatic | Limited slip differential | Locking differential | Manual transmission | Roto Hydramatic | Saxomat | Semi-automatic transmission | Semi-automatic transmission | Super Turbine 300 | Tiptronic Torque converter | Transmission (mechanics) | Transmission Control Unit | Turbo-Hydramatic | Universal joint | |
| Steering | Ackermann steering geometry | Anti-lock braking system | Camber angle | Car handling | Caster angle | Oversteer | Power steering | Rack and pinion | Toe angle | Torque steering | Understeer | |
| Suspension | Axle | Beam axle | Coil spring | De Dion tube | Double wishbone | Electronic Stability Control | Hydragas | Hydrolastic | Hydropneumatic suspension | Independent suspension | Kingpin | Leaf spring | Live axle | MacPherson strut | Multi-link suspension | Panhard rod | Semi-trailing arm suspension | Shock absorber | Sway bar | Swing axle | Torsion beam suspension | Transaxle | Trailing arm | Unsprung weight | Watt's linkage | Wishbone suspension | |
| Brakes | Anti-lock braking system | Disc brake | Drum brake | Hand brake | Hydraulic brake | Inboard brake | Brake lining | Brake fade | Brake fluid | Hydraulic fluid | Brake bleeding | Engine braking | Electronic brakeforce distribution | Regenerative brake |
